Thursday, November 7, 2013

Herringbone Mason Jar Cozy {Tutorial}


I am sorta done with chevron stripes, but I still LOVE herringbone!  I was involved in a fall gift exchange and wanted to send a gift that I loved, but that I also thought my friend would love.  Her favorite color is orange and she loves bright colors. 

I discovered Cuppow mason jar drinking lids a while ago and my whole family loves them.  And...they come in orange!  The lids can be used with hot or cold drinks.  And, either way, the mason jar needs a cozy to keep hand from getting too hot or too cold.

I looked around for a mason jar cozy that I liked and couldn't find one, so I decided to design my own.  I snapped a few photos so I could write this tutorial.

drawing the design


 Herringbone Mason Jar Cozy {Tutorial}

Supplies:

- 1 piece of cotton fabric 12" x 4" for the inside of the cozy

- 2 pieces of cotton batting 12" x 2.25"

- 20 scraps of fabric (will be cut to 1.5" by approximately 4.5")

- 1 hair elastic

- 1 button


Directions:

{Note:  You could easily make this without the herringbone design.  In that case, you would just cut two pieces of fabric and one piece of batting 12"x4" and then follow the directions for putting the cozy together.}

For making the herringbone top, I followed Maureen Cracknell's Herringbone Quilt Tutorial, adjusting the size.  (You will need to refer to her tutorial since I don't go into exact detail on how to sew herringbone strips to the batting.)

First, I cut my strips of cotton batting to 12" by 2.25":


(I currently don't have a rotary cutting board, so I've been using my Pampered Chef cutting board!  See, if you don't have the right tools, ruin use what you've got!)

Draw diagonal lines, 1 inch apart, onto each strip of batting:



Cut scraps of fabric into 1.5" x approximately 4.5" strips and lay them out in the order you want them:


Follow Maureen's directions for sewing the strips onto the batting in the herringbone pattern.


Turn each half over and trim down to 12" by 2.25":


 Sew the halves together at the center using a 1/4" seam and matching the herringbone seams:


Assemble the herringbone front, the fabric back and the hair elastic:

Place the herringbone front on your table, batting side down and herringbone design up.

Put the hair elastic on top of one of the the short edges of the herringbone panel at the center seam.


Lay the fabric back, right side down on top of the herringbone panel and hair elastic and pin together.  (In this photo, it looks like the right side of the orange fabric is up, but that's only because it is a solid kona fabric with no "right" and "wrong" side.)


Starting at the short end with the hair elastic, sew around all 4 edges of the layers, leaving a 3" opening on one of the long sides for turning.


Snip the corners and turn right side out.

Iron the cozy, turning in the raw edges of the opening you used for turning the cozy right side out.

Top stitch all around the cozy, sewing the opening closed as you go.


Wrap the cozy around your mason jar to determine where you want to place the button.

Using a disappearing ink fabric pen, mark where you will sew the button.


Sew button on with a needle and matching thread.

And....voila!  You've got yourself a herringbone mason jar cozy!


Let me know if anything is unclear or you have any questions!

Happy Sewing!
Melissa

6 comments:

  1. Such a great tutorial! Love it! You did a great job on that, too. So fun!

    ReplyDelete
  2. Love this!! Now to look for those drink spouts.... :)

    ReplyDelete
  3. I was the recipient of this and it it pure awesome. Kelly H

    ReplyDelete
  4. Really cute! A great first project for teaching a group.

    ReplyDelete
  5. What a great tutorial! I need a cozy, because I cannot get my work wet - and I love drinking from a mason jar - and one of my own making is the best!! Thanks for posting this!

    ReplyDelete